This cod digester china test tube heater manual will provide you with the necessary information for the correct use of the instrument. Please read it carefully before using the meter.
-The cod digester XC-200 thermo-reactor is constructed of durable materials with a vial capacity to perform up to 4 digestions simultaneously.
-The cod digester reactor can set the heating temperature between 20-180℃ and heating period between 0-120mins.
-The cod digester reactor contains a thermal fuse that prevents overheating, by turning off the heating element automatically with warning beep.
-A beep will be heard and the heating element will turn off at the end of the selected time period.
-The temperature is continuously displayed on the LCD even when there is no active temperature program running.
-The reactor equips transparent plastic protection shield to protect the operator.
-The reactor has USB connector which can connect with 12V Vehicle Power Adaptors for outside using.
-Please examine this product carefully. Make sure that the instrument is not damaged. If any damage occurred during shipment, please notify your Dealer.
±3 ℃(@ 25℃)
4 vials (the diameter of vial should be not more than 16mm.)
10-15 minutes, depending on selected temperature
Environment relative humidity
1. Start up
Prepare the reactor as follows:
•Place the reactor on a flat table. Do not place the instrument under direct sun light.
•Connect the reactor to a power outlet with ground. Verify the correct voltage and frequency are used.
•”USB” connector is for 12V Vehicle Power Adaptors.
See the label on the instrument.
•Turn the reactor ON using the power switch located on the rear panel. Wait until unit displays the heater block temperature.
2. Heating temperature setting
Press “Mode” to choose “Temp setting”, then press UP or DOWN arrow to choose the temperature you need.
3. Heating period setting
Press “Mode” to choose “Time setting”, then press UP or DOWN arrow to choose the heating period you need.
Press "Start" button to trigger heating process.The reactor will beep once the setting temperature is reached.Then,put the test tube into heater block hole,the timer will start to count down the setting period.The"balance time" shows on the screen.After the "Balance time" become "0".A beep will be heard and the heating element will turn off. It means the heating process is finished.
1.How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock,
it is according to quantity.
2.How can I choose the suitable one?
Dear customer, please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
3.How can I pay?
Dear customer, we accept many payment term, such as T/T, Western Union…
4.How to deliver?
Dear customer, we can send by Express, by Sea and by Air.
5.What should I do if some parts broken?
Dear customer, please do not worry, we have 12months warranty except wear parts. You can also buy parts from us after 12months.