3 in 1 Water Quality Tester Digital TDS/TEMP/EC Meter For Drinking and pool Water
Drinking water TDS meter
Feature
1, Measures Total Dissolved Solids(TDS), Electrical Conductivity(EC),and Temperature simultaneouly.
2. Simple operation and easy to carry;
3. Display the status of drinking water ;
4. Low power consumption design, battery life is about 1500 times;
5. High accuracy and automatic temperature compensation;
Drinking water TDS meter
Technical Paremeter
Test Item | Measuring Range | Accuracy | Resolution | Other Technical |
TDS | 0-1999ppm | ±2%F.S | 1ppm | Working voltage:1X3V Working condition:0-50℃ |
Conductivity | 0-4000μS/cm | ±2%F.S | 0-4000μS/cm | |
Temperature | 0-99℃ | ±0.6%F.S | 0.1℃ |
Drinking water TDS meter
Application
Kitchen
Laboratory
Swimming pool
Fish tank
Drinking water TDS meter
sing Steps
Remove the protective cap.
2.Press the ON/OFF button once out of the water. The tester will read "000" .
3. Immerse the tester into the water no more than 2 inches.
4.Wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes (10-30seconds), press the HOLD button to view out of the water.
5.The meter default mode is the TDS measurement.Press the MODE button to cycle to EC measurement(us/cm),press again to cycle to ºC measurement,press once again to cycle to ºF measurement.
6.Press the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
7.After usage, shake off the water from your tester or wipe it with a tissue.
8.Do not touch the metal probes.Clean the probes with rubbing alcohol and a cotton swab.