Introduction:
Portable & Digital ph tester PH-8414
pH-8414 portable ph tester is supplied with E201 pH composite electrode, 9V battery, buffers, protecive box and manual.
The PH-8414 portable ph tester has been specially designed for the maximum facility of use. The handy key board for the selection of the various functions.
The possibility of automatically correcting errors in measurement due to temperature. The display on the front panel reveals the temperature and PH or mV reading taken by the instrument. Moreover, PH-8414 portable ph tester has low battery indicator .
What is pH?
A pH (potential of Hydrogen) measurement reveals if a solution is acidic or alkaline (also base or basic). If the solution has an equal amount of acidic and alkaline molecules, the pH is considered neutral. Very soft water is commonly acidic, while very hard water is commonly alkaline, though unusual circumstances can result in exceptions. The pH scale is logarithmic and runs from 0.0 to 14.0 with 7.0 being neutral. Readings less than 7.0 indicate acidic solutions, while higher readings indicate alkaline or base solutions. Some extreme substances can score lower than 0 or greater than 14, but most fall within the scale.
Does my pH electrode have to be wet?
All glass electrodes have a bulb which must be kept hydrated and a reference junction which must be kept wet to prevent excess leakage of the internal electrolyte solution from the reference junction.
What should I store my pH electrode in?
Ideally, storage solution has the same chemical make-up of what is in the electrode itself, but if that is not available use buffer 4 or 7 solution. NEVER STORE IN PURE (DISTILLED) WATER!!! In the case of electrodes that are continuously immersed, storage is not an issue since they are constantly wet.
Technical Data:
Product name | Portable ph tester PH-8414 |
Measuring range | pH: 0.00~14.00 mV: -1999~+1999mV ℃: 0~100°C |
Resolution | pH: 0.01pH mV: 1mV ℃: 1°C |
Accuracy | pH: ±0.01pH mV: ±1mV ℃: ±0.4°C |
Input impedance | 102 Ω |
Calibration | 1 or 2point |
Power | 9V battery |
Working temperature | 0~60°C, RH≤95%(Without magnetic interference around the meter） |
Auto shut-off | Approx. 8 minutes |
Dimension | 245*200*70mm |
Weight | 210g |
Our company:
Our service:
Certifications:
FAQ:
1.What should I do if I do not know how to use?
Dear customer, please do not worry, manual user will be sent together, you can also contact us with more technological support.
2.Are you trading company or manufacturer ?
We are factory.
3. What is your terms of payment ?
100% T/T in advance ,balance before shippment.
4.Is will be broken during transport?
Dear customer, please do not worry, we do standard export package.
5.What after-sales service can be provided by Lohand ?
The after-sales service of Lohand is divided into two parts: technical support and maintenance.
