Online Turbidity Sensor
Instruction
The online turbidity electrode adopts 90-degree scattered light method and uses a near-infrared light source to eliminate chromaticity interference and meets the IS07027 standard.
The LED emits a near-infrared beam to the sample at a certain angle.The beam will emit scattering when it hits the suspended matter in the sample during transmission.The detector set at 90% of the incident light receives the scattered light.The concentration of suspended matter in the sample is The intensity of the scattered light is directly proportional, so that the concentration of suspended matter in the sample and the turbidity can be calculated by measuring the intensity of the scattered light.
Feature
Smart cleaning
Comes with intelligent device with automatic cleaning function
Sensitive response, wide detection range
Can be used for low turbidity detection. (<1NTU, with flow slot)
Multiple output methods
Support MODBUS / RS485 4-20mA current interface output to facilitate system integration.
Temperature compensation function
Built-in temperature sensor with temperature compensation function makes measurement more accurate.
Online Turbidity Sensor
Model | LH-DZ09-200 | LH-DZ09-1000 | LH-DZ09-3000 |
Measuring range | 0-200 | 0-1000 | 0-3000 |
Resolution | 0.01,0.1,1.0 | 0.1,1.0 | 0.1,1.0 |
Indication error | ±0.2NTU or ±5% | ±1NTU or ±5% | ±1NTU or ±5% |
Operating temperature | 5-40℃ | ||
Deepest depth | Underwater 6M | ||
Digital interface | MODBUS/RS485 | ||
Analog interface | 4-20mA | ||
powered by | 12VDC±20% | ||
calibration | One point or two point | ||
Protection class | Ip68 | ||
Installation method | Flow tank installation or Submerged installation | ||
size | Φ54*150mm | ||
temperature range | -10 -50℃ | ||
Cable length | 5M | ||
Texture | 316 stainless steel |
Online Turbidity Sensor